Dirbame: I-V – 8:00 – 17:00

Jūsų krepšelis yra tuščias.

kategorijos meniu

Bevielis ryšys

Belaidžio ryšio režimasIEEE 802.11b/g/n (Wi-Fi 4), Access Point (AP), Client (STA), Mesh (802.11s), Multi AP
Wifi apsaugaWPA-PSK, WPA2-PSK, WPA3-SAE, WPA-EAP, OWE, WPA2-EAP, WPA3-EAP
SSID/ESSIDESSID stealth mode
Wi-Fi naudotojaiUp to 50 simultaneous connections
Belaidžio ryšio funkcijosWireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
Belaidžio ryšio MAC filtrasAllowlist, blocklist
Belaidžio ryšio QR kodų generatoriusOnce scanned, a user will automatically enter your network without needing to input login information
TravelMateForward Wi-Fi hotspot landing page to a subsequent connected device

Ethernet

LAN2 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Tinklas

MaršrutasStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
ProtokolaiTCP, UDP, IPv4, IPv6, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake On Lan (WOL)
VoIP praėjimo paramaH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Ryšio stebėjimasPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
UgniasienėPort forward, traffic rules, custom rules
Ugniasienės būsenos puslapisView all your Firewall statistics, rules, and rule counters
Prievadų valdymasView device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
Tinklo topologijaVisual representation of your network, showing which devices are connected to which other devices
DHCPStatic and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / išmanusis eilių valdymas (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNSSupported >25 service providers, others can be configured manually
DNS per HTTPSDNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
Tinklo atsarginės kopijosWi-Fi WAN, VRRP, Wired options, each of which can be used as an automatic Failover
Apkrovos balansavimasBalance Internet traffic over multiple WAN connections
Hotspot 2.0Hotspot 2.0 is a Wi-Fi standard that enables seamless, secure, and automatic connection to trusted wireless networks
SSHFSPossibility to mount remote file system via SSH protocol
VRF supportInitial virtual routing and forwarding (VRF) support
Eismo valdymasReal-time monitoring, wireless signal charts, traffic usage history 

Saugumas

AutentifikavimasPre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
UgniasienėPreconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Įsilaužimo prevencijaDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLANPort and tag-based VLAN separation
WEB filtrasBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Prieigos kontrolėFlexible access control of SSH, Web interface, CLI and Telnet
SSL sertifikatų generavimasLet’s Encrypt and SCEP certificate generation methods

VPN

OpenVPNMultiple clients and a server can run simultaneously, 27 encryption methods
OpenVPN šifravimasDES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsecXFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GREGRE tunnel, GRE tunnel over IPsec support
PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPNMethod of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
SSTPSSTP client instance support
ZeroTierZeroTier VPN client support
WireGuardWireGuard VPN client and server support
TincTinc offers encryption, authentication and compression in it’s tunnels. Client and server support.
TailscaleTailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol

OPC UA

Palaikomi režimaiClient, Server
Supported connection typesTCP

MODBUS

Palaikomi režimaiServer, Client
Supported connection typesTCP, RTU(RS232)
Pasirinktiniai registraiMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
Palaikomi duomenų formatai8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

DATA TO SERVER

ProtokolasHTTP(S), MQTT, Azure MQTT
Data to serverExtract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router’s Data to server feature

MQTT Gateway

Modbus MQTT GatewayAllows sending commands and receiving data from MODBUS Server through MQTT broker

DNP3

Palaikomi režimaiStation, Outstation
Supported connectionTCP, RTU(RS232)

DLMS/COSEM

DLMS SupportDLMS – standard protocol for utility meter data exchange
Palaikomi režimaiClient
Supported connection typesTCP, RTU(RS232)
COSEMAllows to scan meter COSEM objects for automatic detection and configuration

API

Teltonika Networks Web API (beta) supportExpand your device’s possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com

Monitoring & Management

WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
FOTAFirmware update from server, automatic notification
SSHSSH (v1, v2)
El. paštasReceive email message status alerts of various services
TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTTMQTT Broker, MQTT publisher
SNMPSNMP (v1, v2, v3), SNMP Trap, Brute force protection
JSON-RPCManagement API over HTTP/HTTPS
MODBUSMODBUS TCP status/control
RMSTeltonika Remote Management System (RMS)

IoT platformos

ThingWorxUtility to interact with Thingworx cloud platform
Cumulocity – Cloud of ThingsAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP. Has reboot and firmware upgrade actions
Azure IoT HubCan be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs
AWS IoT CoreUtility to interact with the AWS cloud platform. Jobs Support: Call the device’s API using AWS Jobs functionality

Sistemos Characteristikos

ProcesoriusMediatek, 580 MHz, MIPS 24KEc
RAM128 MB, DDR2
FLASH saugykla16 MB serial NOR flash

Nustatymai

WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
FOTAUpdate FW
RMSUpdate FW/configuration for multiple devices at once
Nustatymų įsiminimasUpdate FW without losing current configuration
Gamykloje nustatytų parametrų atstatymasA full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer’s configuration

FIRMWARE CUSTOMISATION

Operacinė sistemaRutOS (OpenWrt based Linux OS)
KalbosBusybox shell (ash), Lua 5.1, C, C++
Kūrėjo įrankiaiSDK package with build environment provided
GPL customizationYou can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs
Package ManagerThe Package Manager is a service used to install additional software on the device

Serial

RS232Terminal block connector: TX, RX, RTS, CTS
Serial functionsConsole, Serial over IP, Modem, MODBUS gateway, NTRIP Client

Energija

Jungtis3-pos plugable terminal block
Įeinančios įtampos diapazonas9-30 VDC, reverse polarity protection, surge protection >31 VDC 10us max
PoE (pasyvus)Passive PoE over spare pairs. Possibility to power up through LAN2 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 – 30 VDC
Energijos suvartojimasIdle: < 1 W / Max: < 2 W

Fizinės sąsajos

Ethernet2 x RJ45 ports, 10/100 Mbps
Būsenos LED indikatoriai2 x LAN type LED, 1 x Power LED
Energija1 x 3-pin power connector
Antenos1 x RP-SMA for Wi-Fi
RS2321 x DB9 socket
PerkrovimasReboot/User default reset/Factory reset button
Kita1 x Grounding screw

Fizinės specifikacijos

Korpuso medžiagaAluminium housing
Matmenys (P x A x G)113.10 x 25 x 68.6 mm
Svoris149.2 g
MontavimasIntegrated DIN rail bracket; wall mount and flat surface (additional kit needed)

Darbo aplinka

Darbinė temperatūra-40 °C to 75 °C
Drėgmė10% to 90% non-condensing
IP reitingasIP30

Regulatory & Type Approvals

ReguliavimasCE, UKCA, CB, FCC/IC

RF

Standards (Wi-Fi 2.4 GHz, 5 GHz)47 CFR Part 15 Subpart C – § 15.247
Gamintojas