| Dydis | 174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3″) |
| Svoris | 363 g (12.8 oz) |
| Korpuso medžiaga | Polycarbonate |
| Mounting material | Polycarbonate |
| Tinklo sąsaja | (5) 10/100/1000 Base-T |
| Maitinimo metodas | PoE++, UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU |
| Maksimalus energijos suvartojimas | Without PoE output: 30W, With PoE output: 50W |
| PoE input | 50V DC, 1A |
| PoE output | PoE passthrough, (4) PoE, 50V DC, total 20W |
| LED | White/blue (Learn more) |
| Mygtukas | (1) Factory-reset |
| Digital input | Request to exit/request to enter/remote release/door position sensor |
| Nemaitinamo išvesties rėlė | Lock: 30V DC, 1A, Aux: 30V DC, 1A |
| Maitinamo išvesties rėlė | Lock: 12V DC, 1A, Aux: 12V DC, 0.33A |
| 12V DC, 0.33A PoE cabling requirements | Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable. |
| Darbo aplinka | Indoor use only |
| Darbinė aplinkos temperatūra | 0 to 40° C (32 to 104° F) |
| Aplinkos drėgmė | 5 to 95% noncondensing |
| UL 294 lygis | Destructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I |
| UL 294 pareiškimas | Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |