Dirbame: I-V – 8:00 – 17:00

Jūsų krepšelis yra tuščias.

kategorijos meniu

Patvirtinimai

Cheminių komponentų sertifikavimasCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
SaugumasCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)

Bendra

Matmenys (P × A × G)170.00 mm × 27.60 mm × 93.10 mm (6.69” × 1.09” × 3.67”)
Bendras svoris1.114 kg (2.45 lb)
Installation ModeDesk-Mounted,Wall-Mounted
Maks. energijos suvartojimas120 W
Grynasis svoris0.35 kg (0.77 lb)
Darbo drėgmė5% to 95% (no condensation)
Darbinė temperatūra0 °C to 40 °C (32 °F to 104 °F)
Energijos sunaudojimas miego režime10 W
Maitinimo šaltinis54VDC,2.22A
Santykinė drėgmė5% to 95% (no condensation)
RėmasMetal material, fan-free design
Sandėliavimo temperatūra-40 °C to 85 °C (-40 °F to 185 °F)
Apsauga nuo viršįtampių6 kV

Tinklo parametrai

Vidinė cache atmintis4 Mbits
MAC adresų lentelė8 K
Paketų perdavimo spartaWhole-Device Performance: 4.17 MppsPort Performance: 2.68 Mpps
Prievadai8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port
Perjungimo našumasWhole-Device Performance: 5.6 GbpsPort Performance: 3.6 Gbps

PoE

Maks. PoE prievadų galia30 W
PoE prievadasPoE: Ports 1 to 8
PoE maitinimo biudžetas110 W
PoE galios jungtis8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE standartasIEEE 802.3af,IEEE 802.3at

Programinės įrangos funkcijos

ACL
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported:1. Display the port rate.2. Display the port bandwidth utilization rate.3. Display the PoE power usage.4. Display topology information.5. Display the alarm status.6. Restart ports and devices.7. Enable port long-rage mode.8. Remotely upgrade the device.
IPSG
Ilgo diapazono režimasPorts 1 to 8: up to 300 m.Long range performance may vary depend on camera model or cable condition.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.Support 802.1D STP.Support 802.1w RSTP.
PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
Prievadų izoliacijaPorts 1 to 8: port isolation mode to improve network securityPorts in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
Prievado greičiolimitas
Paslaugų kokybė (QoS)
System MaintenanceSupport device management via web.Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.Support management via Hik-Central Pro.Support remote management via Hik-Partner Pro.Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.Supports 802.1ab LLDP for peer device discovery.Support port mirroring for fault locating.
VIP Port
VLANVLAN is used for network scale planning and network health improvement.Support 802.1Q.Configurable VLAN ID from 1-4094.Support Trunk, Access port mode.Support Max. 4094 VLAN.
Svoris 0,35 kg
Gamintojas